The Cisco SG350X-48PV-K9-NA Switch helps you affordably deploy the high-bandwidth applications and technologies essential to competing in today?s fast-paced, connected world. This next-generation switch is built on Gigabit and 10 Gigabit Ethernet connectivity to give you the highest level of performance. Copper and fiber connection options provide the flexibility to configure your network to handle current applications while also planning for future growth. At the same time, these switches are easy to deploy and manage. Learn More about 48-Port 5G PoE Stackable
The Cisco SG250X-48P-K9-NA Switch is a 48-port Gigabit with Power over Ethernet and 4-port 10 Gigabit Ethernet combo that provides seamless networking. You can deploy and configure a complete business network in minutes with Smart Network Application, FindIT Network Manager, and Network Plug and Play (PnP) support. Energy-efficient capabilities are embedded, including energy detect and Energy Efficient Ethernet (EEE); all provide an nature friendly and cost-effective solution without compromising performance. This switch is part of the Cisco small and midsize business portfolio and is an affordable smart switch equipped with security, performance, and ease of use to help build a solid business network. Operating Temperature 0 Degrees Celsius to 50 Degrees Celsius and Storage Temperature -20 Degrees Celsius to 70 Degrees Celsius . Learn More about SG250X-48P 48-Port Gigabit PoE
The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal, and sending both to the connected access point. The power injector combines 55-VDC power (supplied by internal power supply) with the data signal, sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded, outdoor rated Ethernet cable. The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG. The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter. A shielded, outdoor Ethernet cable connects the power injector to a 10/100/1000 Ethernet switch, hub, or network, and another shielded, outdoor cable carries power and data to the access point's Ethernet port. The power injector's AC power receptacle connects an approved AC power cord to a wall outlet or power strip. The power injector can be mounted on most horizontal and vertical surfaces, but must be mounted in a vertical orientation to comply with safety requirements. Manufacturer: Cisco Systems, Inc. Manufacturer Part Number: AIR-PWRINJ-60RGD1=. Brand Name: Cisco. Product Line: Aironet. Product Name: Aironet PoE Injector. Product Type: PoE Injector. [Technical Information] Protection Type: Surge Protection. [Power Description] Input Voltage: 120 V AC. 230 V AC. Maximum Output Voltage: 55 V DC. Maximum Output Current: 2 A. Maximum Output Power: 60 W. [Interfaces/Ports] Input Ports: 1 Ethernet. Output Ports: 1 Ethernet. [Physical Characteristics] Mount Type: Pole/Wall-mountable. Height: 2.8". Width: 5.9". Length: 8.4". Weigh Learn More about Power Injector 60W Outdoor NA